| 301 stainless steel |
Minimum Properties (annealed condition) |
Ultimate Tensile Strength, psi |
74,700 min |
| Yield Strength, psi |
29,700 min |
| Elongation |
40% min |
| Rockwell Hardness |
B85 |
Minimum Properties (1/4 hard condition) |
Ultimate Tensile Strength, psi |
125,000 min |
| Yield Strength, psi |
75,000 min |
| Elongation |
25% min |
| Rockwell Hardness |
C25 |
Minimum Properties (1/2 hard condition) |
Ultimate Tensile Strength, psi |
150,000 min |
| Yield Strength, psi |
110,000 |
| Elongation |
18% min |
| Rockwell Hardness |
C32 |
Minimum Properties (full hard condition) |
Ultimate Tensile Strength, psi |
185,000 min |
| Yield Strength, psi |
140,000 min |
| Elongation |
9% min |
| Rockwell Hardness |
C41 |
| Chemistry |
Iron (Fe) |
75% |
| Carbon (C) |
0.15% max |
| Chrome (Cr) |
16 - 18% |
| Manganese (Mn) |
2% max |
| Nitrogen (N) |
0.1% max |
| Nickel (Ni) |
6 - 8% |
| Phosphorus (P) |
0.045% max |
| Sulphur (S) |
0.03% max |
| Silicon (Si) |
0.75% max |
At OnlineMetals, we all failed shop class. Multiple times. As a matter of fact, our employment applications
specifically ask to see people's grades for their high school shop classes. If they're too high, they go
into the rejected pile. We're also not engineers, and cannot make any specific recommendations about the suitability
of a given alloy, temper, or shape for your project or application.
All technical data is for comparison purposes only and is NOT FOR DESIGN. It has been compiled
from sources we believe to be accurate but cannot guarantee. This ends the part of the website
that our pointy-headed lawyers made us put in.
T-301 STAINLESS STEEL SHEET 1/2 HARD
T-301 STAINLESS STEEL SHEET 1/4 HARD
T-301 STAINLESS STEEL SHEET ANNEALED
T-301 STAINLESS STEEL SHEET FULL HARD
|