Bearing Bronze Hollowbar (cda 932-SAE 660) - Online Metal Store
Bearing Bronze Hollowbar (cda 932-SAE 660)

Bearing Bronze Hollowbar (cda 932-SAE 660)

Bearing Bronze Hollowbar (CDA 932-SAE 660) is consistently used for bushings, thrust washers, bearings and pump/valve components due to its high strength, wear and corrosion resistance.

Welding, soldering and brazing are possible but not recommended. C932 is not heat treatable.  

CDA 932 - SAE 660 Tolerances

Finished Outside Diameter

Inside Diameter        

Outside Diameter

Up to 1.999”         Inclusive

-0.0190” to -0.0640”

+0.0300” to 0.0400”

Over 2” to 3.999” Inclusive

-0.0190” to -0.0640”

+0.0340” to 0.0440”

Over 4” to 5”        Inclusive

-0.0190” to -0.1090”

+0.0550” to 0.0710”

Over 5” to 9”        Inclusive

-0.0620” to -0.1580”

+0.0780” to 0.1100”

Over 9” to 12”      Inclusive

-0.0780” to -0.1820”

+0.0940” to 0.1340”

Over 12” to 16”    Inclusive

-0.1020” to -0.2140”

+0.1180” to 0.1660”

Refer to our "Guide to Bronze" for grades, shapes and various properties.