The OnlineMetals Guide to Tool Steel

The term Tool Steel is a generic description of steel which has been developed specifically for tooling applications. Generally speaking, Tool Steels are known for their distinctive toughness, resistance to abrasion, their ability to hold a cutting edge, and/or their resistance to deformation at elevated temperatures (red-hardness). Some of the operations that tool steels are used in include Drawing, Blanking, Mold Inserts, Stamping, Metal Slitting, Forming and Embossing, although they are not limited to just those areas.

Tool Steels are produced in the annealed condition for ease of machining. After machining, the steel is heat-treated and quenched depending upon the type of steel being used. The heat treating and quenching operations increase the toughness and strength of the material.

There are three classes of tool steel generally available in the market today - cold work, hot work, and high speed steel:
  • Cold Work steels have high strength, hardenability, impact toughness, and wear resistance. As the name would imply, they are used in environments with lower operating temperatures, typically at 400° or less. The materials that we carry that fall into the Cold Work category are O1, A2, D2, S7 and W1.
  • Hot work steels have many of the same properties of cold working steels, with the added advantage that that those properties are retained at elevated operating temperatures where the tool literally becomes red-hot.
  • High speed steels have all of the properties listed above, but retain those properties in operating areas where the temperatures exceed 1000° F.

The basic properties of the tool steel carried by OnlineMetals.com are listed below:

W-1 Tool Steel
  Heat treat temperature 1450-1600 F
  Quench Water or Brine
  Hardness Rockwell 56c
  Applications Blacksmith tools
Cold Chisels
Hand punches
Cold Forming Tools
Knives
Scissors and Shears
Razors
Woodworking Chisels
  Disadvantages Water hardening tool steels tend to experience significant distortion during the quench operation. In addition, the hardening operation applies only to the outer "case" of the material, rather than being "through-hardened".

O-1 Tool Steel
  Heat treat temperature 1450-1600 F
  Quench Oil
  Hardness Rockwell 62c-64c
  Applications Taps
Reamers
Knurling Tools
Shear Blades
Drills
Coining Dies
Trimming Dies
  Disadvantages Oil hardening tool steels tend to experience less distortion during the quench operation, but they do still show distortion from the original size. The hardening operation is more thorough than with water hardening steels, but not as thorough as the air-hardening grades.

A-2 Tool Steel
  Heat treat temperature 1700-1900 F
  Quench Air
  Hardness Rockwell 59c-62c
  Applications A2 can be used in the same applications as both O1 and W1, but the heat-treated air-hardening steels have deeper hardenability and there is less movement or distortion during heat treatment.

S-7 Tool Steel
  Heat treat temperature 1725-1750 F
  Quench Air or Oil
  Hardness Rockwell 55c-57c
  Applications S7 is good for general tooling and molding applications. It possesses high toughness and shock resistance.
  Disadvantages While S7 is very tough compared to other tool steels, it doesn't have hardness comparable to the other tool steels.

D-2 Tool Steel
  Heat treat temperature 1600-1650 F
  Quench Air or Oil
  Hardness Rockwell 60c-62c
  Applications D2 has high wear resistance, good toughness, and low distortion. It is often chosen when long tool life is required.

At OnlineMetals, we all failed shop class. Multiple times. As a matter of fact, our employment applications specifically ask to see people's grades for their high school shop classes. If they're too high, they go into the rejected pile. We're also not engineers, and cannot make any specific recommendations about the suitability of a given alloy, temper, or shape for your project or application.

All technical data is for comparison purposes only and is NOT FOR DESIGN. It has been compiled from sources we believe to be accurate but cannot guarantee. This ends the part of the website that our pointy-headed lawyers made us put in.


Your Cart

Total: $0.00

View Cart