Aluminum Pipe 6101-T61 Schedule 40 exhibits maximum electrical conductivity, excellent corrosion resistance, and moderate strength. 6101-T61 is typically used in electrical applications as a lower cost and lower weight replacement for copper. The most common application for this product piping for corrosive liquids or gasses.
Our pipe is unthreaded to allow for welded connections.
Pipe is designed to carry liquid/gas/material from one place to another, whereas tube is designed to act as structural support.

Dimension Name |
Specification |
Alloy | 6101 |
Temper | t61 |
Production Method | extruded |
Nominal | 1.5 |
Schedule | schedule 40 |
Outer Diameter | 1.9 |
Wall | 0.1 |
Inner Diameter | 1.7 |
Max Length | 240 |
MTR Availability | Yes |
Full Length | true |
Material | aluminum |
Shape | pipe |
Custom Cut Warehouse | 1 |
This material meets the following specs: ASTM -B317
Weight/Lineal Foot |
||
0.95 pounds |
Mechanical Properties |
|
Property | Value |
Elongation Typical % | 10 |
Melting Point °F | 1150 - 1210 |
Density g/cm^3 | 3 |
Modulus of Elasticity KSI x 10^3 | 10 |
Specific Heat BTU/lb-°F (32-212F) | 0 min |
Thermal conductivity BTU-in/hr-ft^2-°F | 1540 |
Ultimate KSI | 18 min |
Yield KSI | 11 min |
Chemistry Information: 6101 Aluminum |
|
Element | Percentage |
Al | 98 |
Fe | 0 |
Cr | 0.3 |
Cu | 0 - 0.1 |
Mg | 0.35 - 0.8 |
Mn | 0 - 0.03 |
Si | 0.3 - 0.7 |
B | 0 - 0.06 |
Al | 98 |
Cr | 0.3 |
Cu | 0 - 0.1 |
Fe | 0 |
Mg | 0.35 - 0.8 |
Si | 0.3 - 0.7 |
Mn | 0 - 0.03 |
B | 0 - 0.06 |