Bearing Bronze Hollowbar (cda 932-SAE 660)

Bearing Bronze Hollowbar (cda 932-SAE 660)

Bearing Bronze Hollowbar (CDA 932-SAE 660) is consistently used for bushings, thrust washers, bearings and pump/valve components due to its high strength, wear and corrosion resistance.

Welding, soldering and brazing are possible but not recommended. C932 is not heat treatable.  

Bronze C932 is sold in an as cast finish 

CDA 932 - SAE 660 Tolerances

Finished Outside Diameter

Inside Diameter        

Outside Diameter

Up to 1.999”         Inclusive

-0.0190” to -0.0640”

+0.0300” to 0.0400”

Over 2” to 3.999” Inclusive

-0.0190” to -0.0640”

+0.0340” to 0.0440”

Over 4” to 5”        Inclusive

-0.0190” to -0.1090”

+0.0550” to 0.0710”

Over 5” to 9”        Inclusive

-0.0620” to -0.1580”

+0.0780” to 0.1100”

Over 9” to 12”      Inclusive

-0.0780” to -0.1820”

+0.0940” to 0.1340”

Over 12” to 16”    Inclusive

-0.1020” to -0.2140”

+0.1180” to 0.1660”

Refer to our "Guide to Bronze" for grades, shapes and various properties.