1 1/8" ID x 2 1/2" OD Bearing Bronze Hollowbar 932 (SAE 660) Cast OversizedPart #: 24973
- Outer Diameter: 2.5 "
- Wall: 0.6875 "
- Inner Diameter: 1.125 "
Bronze Hollowbar 932 will finish to the stated dimensions. It is hard, strong, resistant to wear, corrosion, and impacts, easily machined, and ductile. 932 is one of the most popular bronze alloys and the standard for general purpose applications. It can be easily soldered and brazed, but shouldn't be welded. 932 is typically used in bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
MTR
Available
Product Information
Please note:
Mechanical Properties
Chemistry Information : 932 Bronze
Yes, this bronze hollowbar is available in various cut lengths ranging from 13" to 105". However, custom cutting is not performed at the warehouse, so you will receive standard cut sizes.
Absolutely. Alloy 932 (SAE 660) is a hard, strong, and wear-resistant bronze commonly used for bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
This cast bronze hollowbar has good machinability rated at 70, a yield tensile strength of 18 ksi, and an ultimate tensile strength of 35 ksi, making it easy to machine while maintaining durability.
Yes, this bronze hollowbar is RoHS compliant (Yes 6C), but it does not comply with REACH regulations.
Yes, a Material Test Report (MTR) is available for this product to verify its material properties and compliance.
This bronze hollowbar has an inner diameter of 1.125 inches, an outer diameter of 2.5 inches, and a wall thickness of 0.6875 inches. It is cast in a hollowbar shape and available in lengths up to 105 inches.
Yes, the 932 bronze alloy is hard, strong, and resistant to wear, corrosion, and impacts. It has good machinability at 70% and is commonly used for bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
This product is offered in multiple standard cut lengths ranging from 13 to 105 inches, all in stock and ready to ship. However, custom cut options are not available from the warehouse.
Yes, material test reports (MTRs) are available for this bronze hollowbar, and it complies with RoHS 6C standards. However, it does not comply with REACH regulations.
The shipping weight varies by length, for example, a 13-inch piece weighs about 17.4 pounds, and a full 105-inch length weighs about 140.3 pounds. All offered lengths are currently in stock and available for immediate shipping.
Dimensions
Continue modifying your quoted cart?
Please note: If you choose to continue modifying your order, you will lose quoted pricing.
- Your cart will adjust to regular pricing of our products, as found on our site.
- If you wish to go back to your original quoted pricing, it will be available on your quote history page in your account until it expires.