1 1/4" ID x 3 1/2" OD Bearing Bronze Hollowbar 932 (SAE 660) Cast OversizedPart #: 24976
- Outer Diameter: 3.5 "
- Wall: 1.125 "
- Inner Diameter: 1.25 "
Bronze Hollowbar 932 will finish to the stated dimensions. It is hard, strong, resistant to wear, corrosion, and impacts, easily machined, and ductile. 932 is one of the most popular bronze alloys and the standard for general purpose applications. It can be easily soldered and brazed, but shouldn't be welded. 932 is typically used in bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
MTR
Available
Product Information
Please note:
Mechanical Properties
Chemistry Information : 932 Bronze
This bronze hollowbar has an inner diameter of 1.25 inches, an outer diameter of 3.5 inches, and a wall thickness of 1.125 inches. It is made from alloy 932 (SAE 660), a cast bronze known for its hardness, strength, and corrosion resistance.
Yes, the hollowbar is available in various cut lengths ranging from 13 inches up to 105 inches. Custom cutting is supported, and each length option is in stock and ready to ship.
Absolutely. Alloy 932 is easily machined with a machinability rating of 70 and is commonly used for bushings, thrust washers, bearings, pumps, and light-duty gears due to its wear resistance and ductility.
Yes, the product is RoHS compliant (Yes 6C), ensuring it meets restrictions on hazardous substances. However, it is not REACH compliant.
Yes, an MTR report is available for this product, providing detailed certification of its material properties and compliance.
This bronze hollowbar has an inner diameter of 1.25 inches, an outer diameter of 3.5 inches, and a wall thickness of 1.125 inches. It is cast in a hollowbar shape and available in lengths up to 105 inches.
Yes, the 932 bronze alloy is hard, strong, resistant to wear, corrosion, and impacts, and has good machinability rated at 70. It is commonly used for bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
Yes, MTR reports are available for this 932 bronze hollowbar, ensuring traceability and quality verification.
The hollowbar is offered in multiple cut lengths ranging from 13 inches up to 105 inches. Shipping weight increases proportionally with length, from about 36.8 lb for 13 inches to nearly 297.4 lb for the full 105-inch length.
This 932 bronze hollowbar is RoHS compliant (Yes 6C) but is not REACH compliant.
Dimensions
Continue modifying your quoted cart?
Please note: If you choose to continue modifying your order, you will lose quoted pricing.
- Your cart will adjust to regular pricing of our products, as found on our site.
- If you wish to go back to your original quoted pricing, it will be available on your quote history page in your account until it expires.