1 1/2" ID x 2 3/8" OD Bearing Bronze Hollowbar 932 (SAE 660) Cast OversizedPart #: 14021
- Outer Diameter: 2.375 "
- Wall: 0.4375 "
- Inner Diameter: 1.5 "
Bronze Hollowbar 932 will finish to the stated dimensions. It is hard, strong, resistant to wear, corrosion, and impacts, easily machined, and ductile. 932 is one of the most popular bronze alloys and the standard for general purpose applications. It can be easily soldered and brazed, but shouldn't be welded. 932 is typically used in bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
MTR
Available
Product Information
Please note:
Mechanical Properties
Chemistry Information : 932 Bronze
This hollowbar is made from bronze alloy 932 (SAE 660) with an outer diameter of 2.375 inches, an inner diameter of 1.5 inches, and a wall thickness of 0.4375 inches. It is cast oversized and produced using the 'As Cast' method.
Yes, the 932 bronze alloy is hard, strong, resistant to wear, corrosion, and impacts, and it has good machinability (rated 70). It is commonly used for bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
Yes, the hollowbar is available in multiple cut lengths ranging from 13 to 105 inches, with a maximum length of 105 inches. Custom cut options are available, although currently there is no custom cut stock in the warehouse.
This bronze hollowbar complies with RoHS (Yes 6C) but does not comply with REACH. It also meets ASTM B505 standards and comes with a Material Test Report (MTR) available.
Shipping weights vary by length, starting at approximately 12.75 lbs for a 13-inch length and going up to about 103 lbs for the full 105-inch length.
Dimensions
Continue modifying your quoted cart?
Please note: If you choose to continue modifying your order, you will lose quoted pricing.
- Your cart will adjust to regular pricing of our products, as found on our site.
- If you wish to go back to your original quoted pricing, it will be available on your quote history page in your account until it expires.