2 1/8" ID x 3 1/2" OD Bearing Bronze Hollowbar 932 (SAE 660) Cast OversizedPart #: 24987
- Outer Diameter: 3.5 "
- Wall: 0.6875 "
- Inner Diameter: 2.125 "
Bronze Hollowbar 932 will finish to the stated dimensions. It is hard, strong, resistant to wear, corrosion, and impacts, easily machined, and ductile. 932 is one of the most popular bronze alloys and the standard for general purpose applications. It can be easily soldered and brazed, but shouldn't be welded. 932 is typically used in bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
MTR
Available
Product Information
Please note:
Mechanical Properties
Chemistry Information : 932 Bronze
This bronze hollowbar has an inner diameter of 2.125 inches, an outer diameter of 3.5 inches, and a wall thickness of 0.6875 inches. It is made from alloy 932 (SAE 660), cast as a hollowbar, and weighs approximately 25.94 pounds per unit.
Yes, alloy 932 is hard, strong, ductile, and resistant to wear, corrosion, and impacts. It has good machinability (rated 70) and is commonly used in bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
The bronze hollowbar is available in multiple standard cut lengths ranging from 13 inches up to 105 inches. However, custom cut lengths are not available from the warehouse for this product.
Yes, the product is RoHS compliant (Yes 6C), but it does not comply with REACH standards.
Yes, a Material Test Report (MTR) is available for this product to verify its chemical and mechanical properties.
This bronze hollowbar has an inner diameter of 2.125 inches, an outer diameter of 3.5 inches, and a wall thickness of 0.6875 inches. It is cast in a hollowbar shape and available in lengths up to 105 inches.
Yes, the 932 alloy is hard, strong, and resistant to wear, corrosion, and impacts. It has good machinability (rated 70) and is commonly used for bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
This product is available in multiple standard cut lengths ranging from 13 to 105 inches. However, the custom cut warehouse value is 0, indicating that custom cutting may not be available from stock.
Yes, it is RoHS compliant (Yes 6C), but it does not comply with REACH regulations. This ensures it meets certain hazardous substance restrictions.
Yes, MTR reports are available for this product, providing assurance on material quality and specifications.
Dimensions
Continue modifying your quoted cart?
Please note: If you choose to continue modifying your order, you will lose quoted pricing.
- Your cart will adjust to regular pricing of our products, as found on our site.
- If you wish to go back to your original quoted pricing, it will be available on your quote history page in your account until it expires.