2 1/4" ID x 3 1/8" OD Bearing Bronze Hollowbar 932 (SAE 660) Cast OversizedPart #: 24989
- Outer Diameter: 3.125 "
- Wall: 0.4375 "
- Inner Diameter: 2.25 "
Bronze Hollowbar 932 will finish to the stated dimensions. It is hard, strong, resistant to wear, corrosion, and impacts, easily machined, and ductile. 932 is one of the most popular bronze alloys and the standard for general purpose applications. It can be easily soldered and brazed, but shouldn't be welded. 932 is typically used in bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
MTR
Available
Product Information
Please note:
Mechanical Properties
Chemistry Information : 932 Bronze
This bronze hollowbar has an inner diameter of 2.25 inches, an outer diameter of 3.125 inches, and a wall thickness of 0.4375 inches. It is produced in a hollowbar shape and is cast oversized to allow for finishing to stated dimensions.
Yes, the 932 bronze alloy is hard, strong, and resistant to wear, corrosion, and impacts. It has good machinability (rated 70) and is commonly used for bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
The 932 bronze alloy can be easily soldered and brazed but should not be welded.
Yes, Material Test Reports (MTR) are available for this 932 bronze hollowbar.
The bronze hollowbar is available in various cut lengths from 13 inches up to 105 inches, all currently in stock and ready to ship.
This bronze hollowbar has an outer diameter of 3.125 inches, an inner diameter of 2.25 inches, and a wall thickness of 0.4375 inches.
Yes, the 932 bronze alloy is hard, strong, resistant to wear and corrosion, and easily machined, making it ideal for bushings, bearings, thrust washers, pumps, and light-duty gears.
Can I get this bronze hollowbar cut to a specific length, and what are the available length options?
Yes, the hollowbar is available in various cut lengths up to a maximum of 105 inches, with options including 13, 26, 39, 52, 65, 78, 91, and 105 inches.
Yes, MTR reports are available for this product, and it complies with RoHS 6C standards, although it is not REACH certified.
The hollowbar is produced as cast and is commonly used in general-purpose applications such as bushings, thrust washers, bearings, pumps, light-duty gears, and valve components.
Dimensions
Continue modifying your quoted cart?
Please note: If you choose to continue modifying your order, you will lose quoted pricing.
- Your cart will adjust to regular pricing of our products, as found on our site.
- If you wish to go back to your original quoted pricing, it will be available on your quote history page in your account until it expires.