2 3/8" ID x 2 7/8" OD Bearing Bronze Hollowbar 932 (SAE 660) Cast OversizedPart #: 24991
- Outer Diameter: 2.875 "
- Wall: 0.25 "
- Inner Diameter: 2.375 "
Bronze Hollowbar 932 will finish to the stated dimensions. It is hard, strong, resistant to wear, corrosion, and impacts, easily machined, and ductile. 932 is one of the most popular bronze alloys and the standard for general purpose applications. It can be easily soldered and brazed, but shouldn't be welded. 932 is typically used in bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
MTR
Available
Product Information
Please note:
Mechanical Properties
Chemistry Information : 932 Bronze
The 932 bronze hollowbar has an outer diameter of 2.875 inches, an inner diameter of 2.375 inches, and a wall thickness of 0.25 inches. It is cast in a hollowbar shape and available in lengths up to 105 inches.
Yes, the 932 bronze alloy is hard, strong, and resistant to wear and corrosion, making it ideal for bearings, bushings, thrust washers, pumps, light duty gears, and valve components. It also has good machinability, rated at 70, allowing for easy machining.
The product is available in multiple standard cut lengths ranging from 13 to 105 inches, all currently in stock. However, custom cut lengths are not available from the warehouse for this hollowbar.
Yes, this 932 bronze hollowbar complies with RoHS 6C standards but does not comply with REACH regulations.
Yes, a material test report (MTR) is available for this product to verify its composition and quality.
This bronze hollowbar has an outer diameter of 2.875 inches, an inner diameter of 2.375 inches, and a wall thickness of 0.25 inches. It is cast in a hollowbar shape, making it suitable for applications requiring a tubular form.
Is the 2 3/8" ID x 2 7/8" OD bearing bronze hollowbar easy to machine and what are its typical uses?
Yes, the 932 alloy bronze hollowbar is easily machined with a machinability rating of 70. It is hard, strong, and resistant to wear and corrosion, making it ideal for bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
The hollowbar is available in multiple cut lengths ranging from 13 inches up to 105 inches. Custom cuts are not stocked in the warehouse, but you can select from the available standard cut lengths when ordering.
Dimensions
Continue modifying your quoted cart?
Please note: If you choose to continue modifying your order, you will lose quoted pricing.
- Your cart will adjust to regular pricing of our products, as found on our site.
- If you wish to go back to your original quoted pricing, it will be available on your quote history page in your account until it expires.