2 3/8" ID x 4" OD Bearing Bronze Hollowbar 932 (SAE 660) Cast OversizedPart #: 24992
- Outer Diameter: 4 "
- Wall: 0.8125 "
- Inner Diameter: 2.375 "
Bronze Hollowbar 932 will finish to the stated dimensions. It is hard, strong, resistant to wear, corrosion, and impacts, easily machined, and ductile. 932 is one of the most popular bronze alloys and the standard for general purpose applications. It can be easily soldered and brazed, but shouldn't be welded. 932 is typically used in bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
MTR
Available
Product Information
Please note:
Mechanical Properties
Chemistry Information : 932 Bronze
This bronze hollowbar has an outer diameter of 4 inches, an inner diameter of 2.375 inches, and a wall thickness of 0.8125 inches. It is cast in a hollowbar shape and available in lengths up to 105 inches.
Yes, the 932 bronze alloy is hard, strong, and resistant to wear and corrosion. It has good machinability (rated 70) and is commonly used for bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
Yes, MTR reports are available for this 932 bronze hollowbar, providing assurance of material compliance and quality.
The hollowbar is offered in various cut lengths ranging from 13 inches to 105 inches. Shipping weight increases proportionally with length, from about 36.9 lbs at 13 inches up to 298.3 lbs at 105 inches.
This 932 bronze hollowbar complies with RoHS (Yes 6C) but does not comply with REACH regulations.
Yes, the 932 SAE 660 bronze alloy is hard, strong, and resistant to wear and corrosion, making it ideal for bushings, thrust washers, bearings, pumps, light duty gears, and valve components. It also has good machinability at 70%, allowing for easy finishing.
The product is offered in multiple cut lengths ranging from 13 inches up to 105 inches, all in stock and ready to ship. However, custom cut options from the warehouse are not available.
Yes, MTR (Material Test Reports) are available for this bronze hollowbar. It complies with RoHS 6C standards but does not meet REACH compliance.
The hollowbar weighs approximately 34.74 pounds per unit and is available in stock with multiple length options ready to ship from Online Metals.
Dimensions
Continue modifying your quoted cart?
Please note: If you choose to continue modifying your order, you will lose quoted pricing.
- Your cart will adjust to regular pricing of our products, as found on our site.
- If you wish to go back to your original quoted pricing, it will be available on your quote history page in your account until it expires.