2 1/2" ID x 4" OD Bearing Bronze Hollowbar 932 (SAE 660) Cast OversizedPart #: 7914
- Outer Diameter: 4 "
- Wall: 0.75 "
- Inner Diameter: 2.5 "
Bronze Hollowbar 932 will finish to the stated dimensions. It is hard, strong, resistant to wear, corrosion, and impacts, easily machined, and ductile. 932 is one of the most popular bronze alloys and the standard for general purpose applications. It can be easily soldered and brazed, but shouldn't be welded. 932 is typically used in bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
MTR
Available
Product Information
Please note:
Mechanical Properties
Chemistry Information : 932 Bronze
This bronze hollowbar has an inner diameter of 2.5 inches, an outer diameter of 4 inches, and a wall thickness of 0.75 inches. It is cast in a hollowbar shape and is available in lengths up to 105 inches.
Yes, the 932 bronze alloy is hard, strong, resistant to wear, corrosion, and impacts, and has good machinability (rated 70). It is commonly used for bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
Yes, MTR reports are available for this product, ensuring traceability and quality verification.
The hollowbar is produced using an 'As Cast' method. It is RoHS compliant (Yes 6C) but does not comply with REACH standards.
The hollowbar is available in multiple cut lengths ranging from 13 inches to 105 inches. Shipping weights vary accordingly, from approximately 36 pounds for 13 inches up to 291 pounds for 105 inches.
The 932 bronze hollowbar has an outer diameter of 4 inches, an inner diameter of 2.5 inches, and a wall thickness of 0.75 inches. It is cast in a hollowbar shape, making it suitable for applications requiring a tubular form.
Yes, this bronze alloy 932 is hard, strong, resistant to wear, corrosion, and impacts, and it has good machinability rated at 70, making it ideal for bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
The maximum length available for this hollowbar is 105 inches. However, custom cut lengths are not available from the warehouse for this product.
Yes, the bronze hollowbar 932 complies with RoHS (Restriction of Hazardous Substances) requirements but does not have REACH compliance.
Yes, a Material Test Report (MTR) is available for this product to verify its material properties and compliance.
Dimensions
Continue modifying your quoted cart?
Please note: If you choose to continue modifying your order, you will lose quoted pricing.
- Your cart will adjust to regular pricing of our products, as found on our site.
- If you wish to go back to your original quoted pricing, it will be available on your quote history page in your account until it expires.