2" ID x 3 1/2" OD Bearing Bronze Hollowbar 932 (SAE 660) Cast OversizedPart #: 7911
- Outer Diameter: 3.5 "
- Wall: 0.75 "
- Inner Diameter: 2 "
Bronze Hollowbar 932 will finish to the stated dimensions. It is hard, strong, resistant to wear, corrosion, and impacts, easily machined, and ductile. 932 is one of the most popular bronze alloys and the standard for general purpose applications. It can be easily soldered and brazed, but shouldn't be welded. 932 is typically used in bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
MTR
Available
Product Information
Please note:
Mechanical Properties
Chemistry Information : 932 Bronze
This bronze hollowbar has an inner diameter of 2 inches, an outer diameter of 3.5 inches, and a wall thickness of 0.75 inches. It is made from alloy 932 (SAE 660) bronze, which is cast and known for its strength, wear resistance, and machinability.
Yes, the 932 bronze hollowbar is easily machined with a machinability rating of 70. It is commonly used for bushings, thrust washers, bearings, pumps, light duty gears, and valve components due to its hardness, corrosion resistance, and impact strength.
Custom cut lengths are available up to a maximum length of 105 inches. Various standard cut lengths are offered in stock, ranging from 13 inches to 105 inches, all ready for shipment.
Yes, material test reports (MTR) are available for this product. It also complies with RoHS standards (RoHS 6C), ensuring it meets environmental and safety regulations.
Shipping weights vary by length, starting at approximately 29.3 pounds for a 13-inch cut and going up to about 236.5 pounds for the full 105-inch length.
This bronze hollowbar features an outer diameter of 3.5 inches, an inner diameter of 2 inches, and a wall thickness of 0.75 inches. It is cast in a hollowbar shape and available in lengths up to 105 inches.
Yes, the 932 alloy is hard, strong, and resistant to wear and corrosion, making it ideal for bushings, thrust washers, bearings, pumps, light duty gears, and valve components. It is also easily machined with a machinability rating of 70.
While this product is offered in various standard cut lengths from 13 to 105 inches, there is no custom cut warehouse stock available. You can select from the available cut lengths in stock.
Yes, this bronze hollowbar is RoHS compliant (Yes 6C), but it is not REACH compliant. It also comes with Material Test Reports (MTR) available for quality assurance.
The shipping weight varies by length, starting at approximately 29.3 lbs for a 13-inch piece and up to 236.5 lbs for a 105-inch piece. All standard lengths are currently in stock and available for immediate shipment.
Dimensions
Continue modifying your quoted cart?
Please note: If you choose to continue modifying your order, you will lose quoted pricing.
- Your cart will adjust to regular pricing of our products, as found on our site.
- If you wish to go back to your original quoted pricing, it will be available on your quote history page in your account until it expires.