4 1/2" ID x 6 1/2" OD Bearing Bronze Hollowbar 932 (SAE 660) Cast OversizedPart #: 25008
- Outer Diameter: 6.5 "
- Wall: 1 "
- Inner Diameter: 4.5 "
Bronze Hollowbar 932 will finish to the stated dimensions. It is hard, strong, resistant to wear, corrosion, and impacts, easily machined, and ductile. 932 is one of the most popular bronze alloys and the standard for general purpose applications. It can be easily soldered and brazed, but shouldn't be welded. 932 is typically used in bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
MTR
Available
Product Information
Please note:
Mechanical Properties
Chemistry Information : 932 Bronze
This bronze hollowbar has an outer diameter of 6.5 inches, an inner diameter of 4.5 inches, and a wall thickness of 1 inch. It is made from alloy 932 (SAE 660), cast as a hollowbar, and weighs approximately 75.31 pounds.
Yes, the 932 bronze alloy is hard, strong, ductile, and resistant to wear, corrosion, and impacts. It has good machinability (rated 70) and is commonly used for bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
The maximum length available for this hollowbar is 105 inches. Custom cut lengths are available, with multiple length options in stock ranging from 13 to 105 inches, all ready to ship.
Yes, this product is RoHS compliant (Yes 6C), ensuring it meets restrictions on hazardous substances. However, it is not REACH compliant.
Yes, a material test report (MTR) is available for this product, providing assurance of its chemical and mechanical properties.
This bronze hollowbar has an outer diameter of 6.5 inches, an inner diameter of 4.5 inches, and a wall thickness of 1 inch. It is cast oversized and shaped as a hollowbar, suitable for applications requiring these specific dimensions.
Yes, the 932 bronze alloy is easily machined with a machinability rating of 70. It is hard, strong, resistant to wear, corrosion, and impacts, with a Brinell hardness of 65 and ultimate tensile strength of 35 ksi, making it ideal for bushings, bearings, and valve components.
Yes, this bronze hollowbar can be custom cut. Available lengths range from 13 inches up to 105 inches, with multiple length options in between to fit your project needs.
The bronze hollowbar complies with RoHS (Restriction of Hazardous Substances) standards, specifically RoHS 6C, ensuring it meets certain environmental safety requirements. However, it is not REACH compliant.
Yes, a Material Test Report (MTR) is available for this bronze hollowbar, providing traceability and verification of material properties.
Dimensions
Continue modifying your quoted cart?
Please note: If you choose to continue modifying your order, you will lose quoted pricing.
- Your cart will adjust to regular pricing of our products, as found on our site.
- If you wish to go back to your original quoted pricing, it will be available on your quote history page in your account until it expires.