5 1/2" ID x 7 1/2" OD Bearing Bronze Hollowbar 932 (SAE 660) Cast OversizedPart #: 25019
- Outer Diameter: 7.5 "
- Wall: 1 "
- Inner Diameter: 5.5 "
Bronze Hollowbar 932 will finish to the stated dimensions. It is hard, strong, resistant to wear, corrosion, and impacts, easily machined, and ductile. 932 is one of the most popular bronze alloys and the standard for general purpose applications. It can be easily soldered and brazed, but shouldn't be welded. 932 is typically used in bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
MTR
Available
Product Information
Please note:
Mechanical Properties
Chemistry Information : 932 Bronze
This bronze hollowbar has an outer diameter of 7.5 inches, an inner diameter of 5.5 inches, and a wall thickness of 1 inch. It is cast in a hollowbar shape and available in lengths up to 105 inches.
Yes, the 932 bronze alloy is easily machined with a machinability rating of 70. It is hard, strong, and resistant to wear and corrosion, making it ideal for bearings, bushings, thrust washers, pumps, and valve components.
Can I order custom cut lengths for this bronze hollowbar, and what are the available length options?
This bronze hollowbar is available in multiple cut lengths ranging from 13 inches up to 105 inches. However, custom cut options from the warehouse are not available, so you can select from the standard offered lengths.
Yes, the bronze hollowbar complies with RoHS (Restriction of Hazardous Substances) standards, specifically RoHS 6C. However, it does not comply with REACH regulations.
Yes, a Material Test Report (MTR) is available for this 932 SAE 660 bronze hollowbar to verify its material properties and quality.
Yes, the 932 SAE 660 bronze alloy is hard, strong, resistant to wear, corrosion, and impacts, and has good machinability (rated 70). It is commonly used for bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
Yes, MTR reports are available for this bronze hollowbar, providing assurance of material compliance and quality.
This bronze hollowbar is offered in multiple cut lengths ranging from 13 inches to 105 inches, with corresponding shipping weights from approximately 94 to 763 pounds. However, custom cut warehouse availability is zero, so cuts are from stock lengths.
This bronze hollowbar complies with RoHS (Yes 6C) but does not comply with REACH regulations.
Dimensions
Continue modifying your quoted cart?
Please note: If you choose to continue modifying your order, you will lose quoted pricing.
- Your cart will adjust to regular pricing of our products, as found on our site.
- If you wish to go back to your original quoted pricing, it will be available on your quote history page in your account until it expires.