5 1/2" ID x 7" OD Bearing Bronze Hollowbar 932 (SAE 660) Cast OversizedPart #: 7922
- Outer Diameter: 7 "
- Wall: 0.75 "
- Inner Diameter: 5.5 "
Bronze Hollowbar 932 will finish to the stated dimensions. It is hard, strong, resistant to wear, corrosion, and impacts, easily machined, and ductile. 932 is one of the most popular bronze alloys and the standard for general purpose applications. It can be easily soldered and brazed, but shouldn't be welded. 932 is typically used in bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
MTR
Available
Product Information
Please note:
Mechanical Properties
Chemistry Information : 932 Bronze
This bronze hollowbar has an inner diameter of 5.5 inches, an outer diameter of 7 inches, and a wall thickness of 0.75 inches. It is cast in a hollowbar shape and available in lengths up to 105 inches.
Yes, the 932 bronze alloy is hard, strong, resistant to wear and corrosion, and has good machinability (rated 70). It is commonly used for bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
Yes, MTR reports are available for this product to verify material properties and compliance.
The hollowbar is offered in multiple cut lengths ranging from 13 inches to 105 inches. Shipping weight increases with length, starting at about 70.5 lbs for 13 inches and up to approximately 569.2 lbs for 105 inches.
This bronze hollowbar complies with RoHS (Yes 6C) but does not comply with REACH regulations.
Yes, this bronze hollowbar is available in various cut lengths ranging from 13" to 105". However, custom cut options are not stocked in the warehouse, so availability depends on the selected length.
This alloy is commonly used for bushings, thrust washers, bearings, pumps, light duty gears, and valve components due to its hardness, strength, wear and corrosion resistance, and good machinability.
The product is RoHS compliant (Yes 6C), but it is not REACH compliant.
Yes, MTR reports are available for this bronze hollowbar, providing assurance of material quality and specifications.
The alloy has a density of 9, Brinell hardness of 65, Rockwell hardness of 27, and an ultimate tensile strength of 35 ksi. It has good machinability rated at 70, making it easy to machine for various applications.
Dimensions
Continue modifying your quoted cart?
Please note: If you choose to continue modifying your order, you will lose quoted pricing.
- Your cart will adjust to regular pricing of our products, as found on our site.
- If you wish to go back to your original quoted pricing, it will be available on your quote history page in your account until it expires.