5" ID x 5 3/4" OD Bearing Bronze Hollowbar 932 (SAE 660) Cast OversizedPart #: 25012
- Outer Diameter: 5.75 "
- Wall: 0.375 "
- Inner Diameter: 5 "
Bronze Hollowbar 932 will finish to the stated dimensions. It is hard, strong, resistant to wear, corrosion, and impacts, easily machined, and ductile. 932 is one of the most popular bronze alloys and the standard for general purpose applications. It can be easily soldered and brazed, but shouldn't be welded. 932 is typically used in bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
MTR
Available
Product Information
Please note:
Mechanical Properties
Chemistry Information : 932 Bronze
This bronze hollowbar has an inner diameter of 5 inches, an outer diameter of 5.75 inches, and a wall thickness of 0.375 inches. It is made from alloy 932 (SAE 660) bronze, known for its hardness, strength, and corrosion resistance.
Yes, the 932 bronze alloy is easily machined with a machinability rating of 70. It is commonly used for bushings, thrust washers, bearings, pumps, light duty gears, and valve components due to its wear resistance and ductility.
The bronze hollowbar is available in multiple cut lengths up to a maximum of 105 inches. Custom cut lengths are available, although there is no custom cut stock in the warehouse, so lead times may vary.
Yes, the bronze hollowbar complies with RoHS (Restriction of Hazardous Substances) standards, ensuring it meets certain environmental safety requirements. However, it does not comply with REACH regulations.
Yes, a Material Test Report (MTR) is available for this bronze hollowbar, providing detailed certification of its material properties.
The 932 bronze hollowbar has an inner diameter of 5 inches, an outer diameter of 5.75 inches, and a wall thickness of 0.375 inches. It is cast in a hollowbar shape and available in lengths up to 105 inches.
Yes, this alloy is hard, strong, and resistant to wear, corrosion, and impacts. It has good machinability (rated 70) and is commonly used for bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
Yes, MTR reports are available for this 932 bronze hollowbar, ensuring traceability and quality verification.
This bronze hollowbar is offered in multiple cut lengths ranging from 13 inches up to 105 inches, all currently in stock and ready to ship.
The hollowbar complies with RoHS (Yes 6C) but does not comply with REACH regulations.
Dimensions
Continue modifying your quoted cart?
Please note: If you choose to continue modifying your order, you will lose quoted pricing.
- Your cart will adjust to regular pricing of our products, as found on our site.
- If you wish to go back to your original quoted pricing, it will be available on your quote history page in your account until it expires.