5" ID x 6 1/2" OD Bearing Bronze Hollowbar 932 (SAE 660) Cast OversizedPart #: 7921
- Outer Diameter: 6.5 "
- Wall: 0.75 "
- Inner Diameter: 5 "
Bronze Hollowbar 932 will finish to the stated dimensions. It is hard, strong, resistant to wear, corrosion, and impacts, easily machined, and ductile. 932 is one of the most popular bronze alloys and the standard for general purpose applications. It can be easily soldered and brazed, but shouldn't be welded. 932 is typically used in bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
MTR
Available
Product Information
Please note:
Mechanical Properties
Chemistry Information : 932 Bronze
This bronze hollowbar has an inner diameter of 5 inches, an outer diameter of 6.5 inches, and a wall thickness of 0.75 inches. It is cast in a hollowbar shape, making it suitable for applications requiring a tubular form.
Yes, the 932 bronze alloy is hard, strong, resistant to wear, corrosion, and impacts, and it has good machinability (rated 70). It is commonly used for bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
The hollowbar is available in multiple cut lengths up to a maximum of 105 inches. Custom cut lengths are available, and the product is offered in various sizes with corresponding shipping weights.
Yes, the 932 bronze hollowbar complies with RoHS standards (Yes 6C), but it is not REACH compliant. This ensures it meets certain restrictions on hazardous substances.
Yes, a Material Test Report (MTR) is available for this product, providing assurance of its material properties and quality.
This bronze hollowbar has an inner diameter of 5 inches, an outer diameter of 6.5 inches, and a wall thickness of 0.75 inches. It is made from alloy 932 (SAE 660), which is a cast bronze known for its hardness, strength, and resistance to wear and corrosion.
Yes, this bronze hollowbar is easily machinable with a machinability rating of 70. It is commonly used in bushings, thrust washers, bearings, pumps, light duty gears, and valve components due to its durability and ductility.
The product is available in multiple cut lengths ranging from 13 inches up to 105 inches. However, there is no custom cut warehouse stock, so lengths are offered in predefined increments as listed.
Yes, material test reports (MTRs) are available for this bronze hollowbar. It also complies with RoHS standards (Yes 6C), ensuring it meets certain environmental and safety regulations.
The shipping weight varies by length, for example, a 13-inch piece weighs about 65 pounds, and a 105-inch piece weighs approximately 525 pounds. All length variants are currently in stock and available for immediate shipment.
Dimensions
Continue modifying your quoted cart?
Please note: If you choose to continue modifying your order, you will lose quoted pricing.
- Your cart will adjust to regular pricing of our products, as found on our site.
- If you wish to go back to your original quoted pricing, it will be available on your quote history page in your account until it expires.