6 1/2" ID x 7 1/2" OD Bearing Bronze Hollowbar 932 (SAE 660) Cast OversizedPart #: 7929
- Outer Diameter: 7.5 "
- Wall: 0.5 "
- Inner Diameter: 6.5 "
Bronze Hollowbar 932 will finish to the stated dimensions. It is hard, strong, resistant to wear, corrosion, and impacts, easily machined, and ductile. 932 is one of the most popular bronze alloys and the standard for general purpose applications. It can be easily soldered and brazed, but shouldn't be welded. 932 is typically used in bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
MTR
Available
Product Information
Please note:
Mechanical Properties
Chemistry Information : 932 Bronze
This bronze hollowbar has an inner diameter of 6.5 inches, an outer diameter of 7.5 inches, and a wall thickness of 0.5 inches. It is cast in a hollowbar shape, suitable for bearing applications.
Yes, the 932 bronze alloy is hard, strong, corrosion and wear resistant, and has good machinability rated at 70. It is commonly used in bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
The product is available in multiple cut lengths from 13 inches up to a maximum length of 105 inches. However, custom cut options are not stocked in the warehouse, so availability depends on the selected length variant.
Yes, this bronze hollowbar complies with RoHS (Restriction of Hazardous Substances) standards, but it does not have REACH compliance. It also comes with an available Material Test Report (MTR) for quality assurance.
Shipping weights vary by length, starting at approximately 55.9 lb for the 13-inch cut and going up to about 451.4 lb for the full 105-inch length.
This bronze hollowbar is made from alloy 932 (SAE 660), known for its hardness, strength, wear and corrosion resistance, and good machinability (rated 70). It has a wall thickness of 0.5", an inner diameter of 6.5", and an outer diameter of 7.5". It offers a Brinell hardness of 65 and an ultimate tensile strength of 35 ksi.
Yes, the hollowbar is available in multiple cut lengths ranging from 13" up to 105". Custom cut options are offered with precise finishing to the stated dimensions, ensuring it meets your project requirements.
Absolutely. Alloy 932 is a popular general-purpose bronze alloy commonly used for bushings, thrust washers, bearings, pumps, light-duty gears, and valve components due to its strength, wear resistance, and ductility.
Yes, this bronze hollowbar complies with RoHS standards (RoHS Yes 6C), ensuring it meets restrictions on hazardous substances. However, it is not REACH compliant.
Yes, a Material Test Report (MTR) is available for this product, providing detailed certification of its material properties and compliance.
Dimensions
Continue modifying your quoted cart?
Please note: If you choose to continue modifying your order, you will lose quoted pricing.
- Your cart will adjust to regular pricing of our products, as found on our site.
- If you wish to go back to your original quoted pricing, it will be available on your quote history page in your account until it expires.