6" ID x 7 1/2" OD Bearing Bronze Hollowbar 932 (SAE 660) Cast OversizedPart #: 7927
- Outer Diameter: 7.5 "
- Wall: 0.75 "
- Inner Diameter: 6 "
Bronze Hollowbar 932 will finish to the stated dimensions. It is hard, strong, resistant to wear, corrosion, and impacts, easily machined, and ductile. 932 is one of the most popular bronze alloys and the standard for general purpose applications. It can be easily soldered and brazed, but shouldn't be welded. 932 is typically used in bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
MTR
Available
Product Information
Please note:
Mechanical Properties
Chemistry Information : 932 Bronze
This bronze hollowbar has an inner diameter of 6 inches, an outer diameter of 7.5 inches, and a wall thickness of 0.75 inches. It is cast in a hollowbar shape, making it suitable for applications requiring a tubular form.
Yes, the 932 bronze alloy is hard, strong, resistant to wear, corrosion, and impacts, and has good machinability rated at 70. It is commonly used for bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
The product is available in multiple lengths up to a maximum of 105 inches. However, custom cut lengths are not available from the warehouse for this item.
Yes, material test reports (MTR) are available for this bronze hollowbar, and it complies with RoHS standard Yes 6C, ensuring it meets certain environmental and safety regulations.
The bronze hollowbar is in stock and available for immediate shipping in lengths ranging from 13 to 105 inches. Shipping weights vary by length, starting at approximately 75.8 lb for 13 inches and up to 612.36 lb for 105 inches.
This bronze hollowbar has an inner diameter of 6 inches, an outer diameter of 7.5 inches, and a wall thickness of 0.75 inches. It is made from alloy 932 (SAE 660) bronze, which is cast and known for its hardness, strength, wear and corrosion resistance.
Yes, this bronze hollowbar has good machinability (rated 70) and is typically used for bushings, thrust washers, bearings, pumps, light duty gears, and valve components due to its strength and ductility.
The product is available in multiple cut lengths up to a maximum of 105 inches. Custom cut lengths are available, but the custom cut warehouse stock is zero, so availability depends on current inventory.
Yes, material test reports (MTRs) are available for this product. It also complies with RoHS standards (Yes 6C), but it is not REACH compliant.
Shipping weights vary by length, starting at approximately 75.8 lbs for a 13-inch length and going up to about 612.4 lbs for the full 105-inch length.
Dimensions
Continue modifying your quoted cart?
Please note: If you choose to continue modifying your order, you will lose quoted pricing.
- Your cart will adjust to regular pricing of our products, as found on our site.
- If you wish to go back to your original quoted pricing, it will be available on your quote history page in your account until it expires.