OVERVIEW SPECIFICATIONS AND TECHNICAL INFORMATION
3 inch ETP C110 Copper Square Rods are commonly used for bus bars, wiring and other electrical hardware. ETP (Electrolytic Tough Pitch Copper) can be soldered, brazed but not heat treated. Half-Hard C110 offers higher tolerance than the hard version of the alloy. This size is a popular substitute for 6mm copper bar.

Dimension Name |
Specification |
Alloy | 110 |
Temper | H02 |
Height | 3 |
Max Length | 144 |
MTR Availability | No |
Full Length | true |
Material | Copper |
Shape | Bar-Square |
Custom Cut Warehouse | 1 |
Material Specifications
This material meets the following specs: ASTM -B187
Weight/Lineal Foot |
||
34.78 pounds |
Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it,you agree that any decisions you make regarding materials for your project are at your own discretion.
Mechanical Properties |
|
Property | Value |
Density g/cm^3 | 9 |
Rockwell Hardness B scale | 40 |
Elongation Typical % | 14 |
Melting Point °F | 1949 - 1981 |
Modulus of Elasticity KSI x 10^3 | 16 - 18 |
Specific Heat BTU/lb-°F (32-212F) | 9 |
Ultimate Tensile Strength KSI | 42 |
Thermal conductivity BTU-in/hr-ft^2-°F | 2710 |
Yield KSI | 36 |
Shear Strength KSI | 26 |
Chemistry Information: 110 Copper |
|
Element | Percentage |
Cu | 99.9 |
O | 0.04 |