Product Details, Specifications, and Technical Information
Stainless Rectangle Bar 440C offers high strength, moderate corrosion resistant, good hardness and wear resistance. After heat treatment, 440C is capable of attaining the highest strength, hardness and wear resistance of all the stainless alloys. It is typically used in rolling element bearing, valve seats, high-quality knife blades, surgical instruments, chisels, gage blocks, cutlery, ball bearings and races, molds and dies, knives, valve components, measuring instruments.
Dimension Name | Specification |
Thickness | 0.625 |
Width | 3 |
Max Length | 36 |
Alloy | 440C |
Production Method | Ground |
Shape Type | Oversize |
Eniteo Vendor ID | 3145 |
MTR Availability | Yes |
Material | Stainless Steel |
Shape | Bar-Rectangle |
Custom Cut Warehouse | 0 |
Material Specifications
This material meets the following specs: ASTM -A276
Weight/Lineal Foot | ||
6.44 pounds |
Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it,you agree that any decisions you make regarding materials for your project are at your own discretion.
Mechanical Properties | |
Property | Value |
Yield Tensile Strength KSI | 65 |
Density g/cm^3 | 8 |
Ultimate Tensile Strength KSI | 100 |
Rockwell Hardness B Scale | 99 |
Melting Point °F | 2500 - 2700 |
Brinell Hardness 3000 kg load | 234 |
Elongation % in 2 in. | 14 |
Shear Strength KSI | 63 |
Machinability % | 40 |
Electrical Conductivity % IACS | 2 |
Chemistry Information: 440C Stainless Steel | |
Element | Percentage |
Fe | 80.75 |
C | 1.05 max |
Mn | 0.4 max |
Si | 0.4 max |
Mo | 0.4 max |
Cr | 17 max |