- Home
- product guide
- Alloy
6060
Aluminum 6060 Product Guide
Applications | Aluminum 6060 Specifications | Mechanical and Chemical Data
Overview
6060 aluminum is a medium strength alloy more closely related to 6063 than to 6061 but will have more magnesium than 6063. This alloy is mainly found in Europe with metric sizes and is commonly heat treated to a temper with higher strength but low ductility. 6060 alloy is very good for anodizing. The main alloy ingredients of 6060 aluminum are magnesium and silicon.
Common Trade Names
UNS A96060, AA6060, Al6060
Other Resources
Safety Data Sheet | Weight Calculator | Mill Test Reports
Products
Purchase Rectangle Bar 6060 | Round Bar 6060 | Rectangle Tube 6060 | Round Tube 6060 | Square Tube 6060
Applications
- Complex Cross Sections
- Anodizing Projects
Mechanical Information | ||||
Density | Ultimate Tensile Strength | Yield Tensile Strength | Fatigue Strength | |
---|---|---|---|---|
Imperial | 0.1 lb/in3 | 32,000 psi | 24,000 psi | 10,100 psi |
Metric | 2.7 g/cc | 220 MPa | 170 MPa | 70 MPa |
Mechanical Information | ||||
Modulus of Elasticity | Shear Modulus | Shear Strength | Melting Point | |
---|---|---|---|---|
Imperial | 9,900 ksi | 3,800 ksi | 18,800 psi | 1,130-1,210 F |
Metric | 68 GPa | 26 GPa | 130 MPa | 610-660 C |
Mechanical Information | ||||
Electrical Conductivity | Hardness Brinell | Elongation at break percentage | Poissons Ratio | Machinability Percentage |
---|---|---|---|---|
54% IACS | 78 | 11 | 0.33 | 30 |
Chemistry Information
|
|
Element |
Percentage |
Fe | 0.3 max |
Al | 98 |
Cu | 0 - 0.1 |
Cr | 0 - 0.05 |
Mg | 0.35 - 0.6 |
Mn | 0.1 max |
Si | 0.3 - 0.6 |
Ti | 0.1 max |
Zn | 0.15 max |