Cast Iron 80-55-06 Product Guide
Applications | Cast Iron 80-55-06 Specifications | Mechanical and Chemical Data
Overview
Cast Iron 80-55-06 Dura-bar is a ductile iron grade offering high wear resistance, strength, durability, ductility, with excellent consistency and finish. Tensile and Yield Strength are comparably strong to 1040 steel in the "as-rolled" condition.
80-55-06 Dura-Bar is manufactured through the Continuous Cast process, which is actually closer to extrusion than casting. However, this process causes all of the impurities in the molten iron to float to the top of the crucible, away from the metal being used to create the bar. This removes porosity and other impurities common to other cast iron grades.
80-55-06 can be oil quench hardened from 1600 F (885 C) to a minimum hardness of Rockwell C 50 on the outside of the bar. The inside diameter hardness will be less than Rockwell C 50.
It is typically used in the automotive and power industries for gears, rotors, pistons, valves, rollers, bushings, chucks, flywheels, pile drivers, rams pulleys, housings, and motorcycle disc brakes.
DURA-BAR is a trademark of Dura-bar.
Common Trade Names
UNS F33800, Partially Pearlitic Ductile Iron
Other Resources
Safety Data Sheet | Weight Calculator | Mill Test Reports
Products
Applications
- Automotive Parts
- Power Transmission Parts
- Gears
- Rotors
- Pistons
- Valves
- Rollers
- Bushings
- Chucks
- Flywheels
- Pile Drivers
- Ram Pulleys
- Housings
- Motorcycle Disc Brakes
Cast Iron 80-55-06 Specifications
ASTM |
|---|
| A536 |
| Mechanical Information | |||
| Ultimate Tensile Strength | Yield Tensile Strength | Elongation at break percentage | |
|---|---|---|---|
| Imperial | 80,000 psi min | 55,000 psi min | 6 min |
| Metric | 551 MPa | 379 MPa | |
