Shop all Products
- Home
- product guide
- Alloy
H13
H13 Product Guide
Applications | Mechanical and Chemical Data | Tolerances
Overview
With high toughness and very good stability during heat treatment, this tool steel provides good wear resistance in hot and cold work tooling. Typically used in cores, cavities for dies, and tools that require toughness and polishability.
Common Trade Names
UNS T20813, AISI Type H13, Hot Work Tool Steel, Firechrome 44
Other Resources
Weight Calculator | Mill Test Reports
Products
H13 Drill Rod | H13 Rectangle Bar | H13 Square Bar
Applications
- Cores
- Dies
- Tooling
Physical Properties H13 | |||||
| |||||
---|---|---|---|---|---|
Density | 0.282 lb/in3 | ||||
Ultimate Tensile Strength | 174-231 ksi | ||||
Yield Tensile Strength | 145-200 ksi | ||||
Hardness Rockwell | Brinell | C40-48 | 371-451 | ||||
Reduction of Area | 50% | ||||
Modulus of Elasticity | 31,200 ksi | ||||
Poisson's Ratio | 0.29 | ||||
Machinability Percentage | 50% | ||||
Melting Point | 2,580-2,660 °F | ||||
Specific Heat | 1.1 x 10^-1 BTU/lb-°F | ||||
Thermal Conductivity | 204 BTU-in/hr-ft^2-°F | ||||
Electrical Conductivity | 8.3% IACS |
Chemistry Information
|
|
Element |
Percentage |
Fe | 88.8 - 92 |
Cr | 4.8 - 5.5 |
Si | 0.8 - 1.2 |
Mo | 1.1 - 1.8 |
Mn | 0.2 - 0.5 |
C | 0.32 - 0.45 |
V | 0.8 - 1.2 |
Cu | 0 - 0.25 |
Ni | 0 - 0.3 |
P | 0 - 0.03 |
S | 0 - 0.03 |
Continue modifying your quoted cart?
Please note: If you choose to continue modifying your order, you will lose quoted pricing.
- Your cart will adjust to regular pricing of our products, as found on our site.
- If you wish to go back to your original quoted pricing, it will be available on your quote history page in your account until it expires.
Or