Get $8.99 Ground Shipping on Rod & Bar up to 24" & Less than 10lbs!- Home
- product guide
- Alloy
Stainless N50 Product Guide
Applications | Specifications | Mechanical and Chemical Data | Tolerances
Overview
Also called "Nitronic 50", this alloy has exceptional wear, galling resistance, and corrosion resistance superior to 316 stainless. Designed as an all-purpose steel, it is a fully austenitic alloy that maintains its physical properties at elevated and sub-zero temperatures. Additionally, N50 has about twice the yield strength of 304 and 316 stainless. It is typically used in fasteners, pins and bushings, wear rails, roller bearings, pump components, and other marine environments.
NITRONIC is a trademark of AK Steel.
Common Trade Names
UNS S20910, XM-19, ISO 15156-3, Alloy 22-13-5, N-50 Stainless, Nitrogen-Strengthened Stainless Steel
Other Resources
Safety Data Sheet | Weight Calculator | Mill Test Reports
Products
Applications
- Pins
- Fasteners
- Bushings
- Wear Rails
- Roller Bearings
- Pump Components
- Marine Components
Stainless N50 Specifications
ASTM | AMS | ASME |
|---|---|---|
| A182 | 5764 | SA-479 |
| A183 | ||
| A276 | ||
| A580 |
| Physical Properties Nitronic 50 | |||||
| | |||||
|---|---|---|---|---|---|
| Density | 0.285 lb/in3 | ||||
| Ultimate Tensile Strength | 113 ksi | ||||
| Yield Tensile Strength | 59.5 ksi | ||||
| Shear Modulus | 11,000 ksi | ||||
| Shear Strength | 77 ksi | ||||
| Hardness Rockwell | Brinell | B89.5 | 183 | ||||
| Elongation at Break Percentage | 43% | ||||
| Reduction of Area | 66% | ||||
| Modulus of Elasticity | 28,500 ksi | ||||
| Poisson's Ratio | 0.28 | ||||
| Machinability Percentage | 21% | ||||
| Melting Point | 2,510-2,590 °F | ||||
| Specific Heat | 1.1 x 10^-1 BTU/lb-°F | ||||
| Thermal Conductivity | 92 BTU-in/hr-ft^2-°F | ||||
|
Chemistry Information
|
|
Element |
Percentage |
| Cr | 22 |
| Ni | 12.5 |
| N | 0.3 |
| Mn | 5 |
| Fe | 58 |
| Mo | 2.25 |
| Si | 1 max |
