OVERVIEW SPECIFICATIONS AND TECHNICAL INFORMATION
0.063" 5052-H32 Bare Aluminum Sheet is commonly used for the bodies of boats, buses, trucks, utensils, mail boxes and trailers, as well as for chemical drums. It is nonmagnetic and not heat treatable. "PVC 1 SIDE?" That refers to a PVC coating the mill adds for protective purposes. The coating peels off easiliy when ready to use.

Dimension Name |
Specification |
Alloy | 5052 |
Temper | H32 |
Covering | Pvc 1 Side |
Thickness | 0.063 |
Max Width | 48 |
Max Length | 120 |
MTR Availability | Yes |
Full Length | true |
Material | Aluminum |
Shape | Sheet/Plate |
Custom Cut Warehouse | 1 |
Material Specifications
This material meets the following specs: ASTM -B209
Weight/Lineal Foot |
||
0.88 pounds |
Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it,you agree that any decisions you make regarding materials for your project are at your own discretion.
Mechanical Properties |
|
Property | Value |
Brinell hardness 500 kg load | 60 min |
Elongation 1/16"" thick sample | 12 |
Elongation 1/2"" thick sample | 18 |
Endurance limit Based on 500,000,000 cycles of completely reversed stress using the R.R. Moore type of machine and specimen | 17 |
Modulus of Elasticity Average of tension and compression moduli. Compression modulus is about 2% greater than tension modulus | 10 |
Ultimate Tensile Strength | 33 |
Yield | 28 |
Shear Strength | 20 |
Chemistry Information: 5052 Aluminum |
|
Element | Percentage |
Al | 97.3 |
Cr | 0.15 - 0.35 |
Fe | 0.4 max |
Cu | 0.1 max |
Mg | 2.2 - 2.8 |
Mn | 0.1 max |
Si | 0.25 max |
Zn | 0.1 max |