OVERVIEW SPECIFICATIONS AND TECHNICAL INFORMATION
Aluminum Sheet 6061-T6 DFAR exhibits above average corrosion resistance, good machinability, high strength, light weight, good weldability, and the ability to be heat treated for even higher strength, all at an affordable price. 6061 is the most commonly used aluminum alloy in the world due to its positive characteristics. It is typically used in aerospace, automotive, cameras, couplings, marine hardware, electrical components, decorative hardware, structural applications, pins, brakes, pistons, valves, and bicycle frames.

Dimension Name |
Specification |
Alloy | 6061 |
Temper | T6 |
DFAR | true |
Covering | Pvc 1 Side |
Thickness | 0.09 |
Max Width | 48 |
Max Length | 120 |
MTR Availability | Yes |
Full Length | true |
Material | Aluminum |
Shape | Sheet/Plate |
Custom Cut Warehouse | 1 |
This material meets the following specs: ASTM -B209, AMS -4027, AMS -QQ-A-250/11
Weight/Lineal Foot |
||
1.28 pounds |
Mechanical Properties |
|
Property | Value |
Elongation 1/2"" thick sample | 17 |
Brinell hardness 500 kg load | 95 min |
Elongation 1/16"" thick sample | 12 |
Endurance limit Based on 500,000,000 cycles of completely reversed stress using the R.R. Moore type of machine and specimen | 14 |
Modulus of Elasticity Average of tension and compression moduli. Compression modulus is about 2% greater than tension modulus | 10 |
Ultimate Tensile Strength | 45 |
Shear Strength | 30 |
Yield | 40 |
Chemistry Information: 6061 Aluminum |
|
Element | Percentage |
Al | 98 |
Cr | 0.04 - 0.35 |
Cu | 0.15 - 0.4 |
Fe | 0.7 max |
Mg | 0.8 - 1.2 |
Mn | 0.15 max |
Si | 0.4 - 0.8 |
Ti | 0.15 max |
Zn | 0.25 max |