1 3/8" ID x 2 3/8" OD Bearing Bronze Hollowbar 932 (SAE 660) Cast OversizedPart #: 24977
- Outer Diameter: 2.375 "
- Wall: 0.5 "
- Inner Diameter: 1.375 "
Bronze Hollowbar 932 will finish to the stated dimensions. It is hard, strong, resistant to wear, corrosion, and impacts, easily machined, and ductile. 932 is one of the most popular bronze alloys and the standard for general purpose applications. It can be easily soldered and brazed, but shouldn't be welded. 932 is typically used in bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
MTR
Available
Product Information
Please note:
Mechanical Properties
Chemistry Information : 932 Bronze
This bronze hollowbar has an outer diameter of 2.375 inches, an inner diameter of 1.375 inches, and a wall thickness of 0.5 inches. It comes in a hollowbar shape and is available in lengths up to 105 inches.
Yes, the 932 SAE 660 bronze hollowbar is hard, strong, and resistant to wear and corrosion. It has good machinability and is commonly used for bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
This product is available in multiple standard cut lengths ranging from 13 to 105 inches. However, custom cut options are not available from the warehouse for this item.
This bronze hollowbar complies with RoHS (Yes 6C) but does not comply with REACH regulations.
Yes, a Material Test Report (MTR) is available for this bronze hollowbar to verify its material properties and compliance.
This bronze hollowbar has an inner diameter of 1.375 inches, an outer diameter of 2.375 inches, and a wall thickness of 0.5 inches. It is cast in a hollowbar shape, making it suitable for applications requiring a tubular form.
Yes, the 932 bronze alloy is hard, strong, and resistant to wear, corrosion, and impacts. It has good machinability (rated 70) and is commonly used for bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
The bronze hollowbar is available in multiple cut lengths up to a maximum of 105 inches. However, custom cut warehouse availability is zero, so custom cuts may not be stocked but can be requested.
Yes, MTR reports are available for this product, and it complies with RoHS 6C standards. However, it does not comply with REACH regulations.
The product weight varies by length, with a 13-inch piece weighing approximately 13.03 pounds. Prices range from $234.50 for shorter lengths up to $1595.02 for the full 105-inch length.
Dimensions
Continue modifying your quoted cart?
Please note: If you choose to continue modifying your order, you will lose quoted pricing.
- Your cart will adjust to regular pricing of our products, as found on our site.
- If you wish to go back to your original quoted pricing, it will be available on your quote history page in your account until it expires.