2" ID x 3 3/4" OD Bearing Bronze Hollowbar 932 (SAE 660) Cast OversizedPart #: 7912
- Outer Diameter: 3.75 "
- Wall: 0.875 "
- Inner Diameter: 2 "
Bronze Hollowbar 932 will finish to the stated dimensions. It is hard, strong, resistant to wear, corrosion, and impacts, easily machined, and ductile. 932 is one of the most popular bronze alloys and the standard for general purpose applications. It can be easily soldered and brazed, but shouldn't be welded. 932 is typically used in bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
MTR
Available
Product Information
Please note:
Mechanical Properties
Chemistry Information : 932 Bronze
Yes, this bronze hollowbar is available in various cut lengths ranging from 13" to 105". However, custom cut options are not stocked in the warehouse, so availability depends on the selected length variant.
Absolutely. The 932 bronze alloy is hard, strong, wear and corrosion resistant, and easily machined, making it ideal for bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
Yes, MTR reports are available for this product, providing assurance of its material properties and compliance.
The hollowbar has an outer diameter of 3.75", an inner diameter of 2", and a wall thickness of 0.875". It is cast as-cast, weighs approximately 33.49 lbs per unit, and features good machinability with a rating of 70.
This bronze hollowbar complies with RoHS (Yes 6C) but is not compliant with REACH regulations.
This bronze hollowbar has an outer diameter of 3.75 inches, an inner diameter of 2 inches, and a wall thickness of 0.875 inches. It is made from alloy 932 (SAE 660), which is a cast bronze known for its hardness, strength, wear resistance, and good machinability.
Yes, the hollowbar can be custom cut with available lengths ranging up to 105 inches. Various length options are in stock, and each cut length has a corresponding ship weight listed.
Absolutely. Alloy 932 is commonly used for bushings, thrust washers, bearings, pumps, light duty gears, and valve components due to its strength, wear resistance, and ductility.
Yes, material test reports (MTRs) are available for this product. Additionally, it complies with RoHS 6C standards, ensuring it meets certain environmental and safety regulations.
The 932 bronze hollowbar has good machinability rated at 70, making it easy to machine. However, it should not be welded but can be easily soldered or brazed.
Dimensions
Continue modifying your quoted cart?
Please note: If you choose to continue modifying your order, you will lose quoted pricing.
- Your cart will adjust to regular pricing of our products, as found on our site.
- If you wish to go back to your original quoted pricing, it will be available on your quote history page in your account until it expires.