Aluminum 6061-T6/651/6511/T4 Product Guide

Overview

6061 Aluminum is, by any measure, the most commonly used aluminum alloy in the world. It is useful in almost any application due to its strength, heat treatability, comparatively easy machining, and weldability. If that were not enough, it is also capable of being anodized, adding a layer of protection for finished parts. It is typically used in aircraft components, cameras, couplings, marine fittings and hardware, electrical components and connectors, decorative hardware, pins, brake and hydraulic pistons, valves, and bicycle frames.

Common Trade Names

UNS A96061, ISO AlMg1SiCu, AA6061-T6, Al6061-T651, AA6061-T4, Al6061-T4

Specifications - Aluminum 6061

ASTM

B209, B210, B211-03, B221-14, B308

AMS

QQ-A-200/9, QQ-A-225/8, 4027, 4082, 4117H, 4150

ASME

SB-221

Shop All Aluminum 6061 Products

Products

Aluminum Angle 6061

Hex Bar 6061

Rectangle Bar 6061

Round Bar 6061

Square Bar 6061

American Standard Channel 6061

Aluminum Assoc. Channel 6061

Aluminum Assoc. I-Beam 6061

American Standard I-Beam 6061

Pipe 6061

Tread Plate 6061

Sheet/Plate 6061

T-Bar 6061

Threaded Rod 6061

Rectangle Tube 6061

Round Tube 6061

Square Tube 6061

Applications

Aerospace

Marine fittings

Electronics

Decorative hardware

Hydraulic equipment

Cameras

Other Resources

Safety Data Sheet | Weight Calculator | Mill Test Reports

Mechanical and Chemical Properties

	-O	-T4	-T6	-T651	-T6511
Physical Properties 6061
Density	0.1 lb/in3	0.1 lb/in3	0.1 lb/in3	0.1 lb/in3	0.1 lb/in3
Ultimate Tensile Strength	18 ksi	35 ksi	45 ksi	46 ksi	42 ksi
Yield Tensile Strength	8 ksi	21 ksi	40 ksi	39 ksi	40 ksi
Fatigue Strength	9 ksi	14 ksi	14 ksi	14 ksi	15 ksi
Shear Strength	12 ksi	24 ksi	30 ksi	30 ksi	25 ksi
Shear Modulus	3,800 ksi	3,800 ksi	3,800 ksi	3,800 ksi	3,800 ksi
Hardness Rockwell \| Brinell	N/A \| 30	B27 \| 65	B60 \| 95	B58.5 \| 93	B58.5 \| 93
Elongation at Break Percentage	25%	22%	12%	11%	9%
Modulus of Elasticity	10,000 ksi	10,000 ksi	10,000 ksi	10,000 ksi	10,000 ksi
Poisson's Ratio	0.33	0.33	0.33	0.33	0.33
Machinability Percentage	30%	50%	50%	50%	50%
Melting Point	1,080-1,205 °F	1,080-1,205 °F	1,080-1,205 °F	1,080-1,205 °F	1,080-1,205 °F
Specific Heat	2.14 x 10^-1 BTU/lb-°F	2.14 x 10^-1 BTU/lb-°F	2.14 x 10^-1 BTU/lb-°F	2.14 x 10^-1 BTU/lb-°F	2.14 x 10^-1 BTU/lb-°F
Thermal Conductivity	1,250 BTU-in/hr-ft^2-°F	1,070 BTU-in/hr-ft^2-°F	1,160 BTU-in/hr-ft^2-°F	1,160 BTU-in/hr-ft^2-°F	1,160 BTU-in/hr-ft^2-°F
Electrical Conductivity	43% IACS	43% IACS	43% IACS	43% IACS	43% IACS

Chemistry Information
Element	Percentage
Al	98
Cr	0.04 - 0.35
Cu	0.15 - 0.4
Fe	0.7 max
Mg	0.8 - 1.2
Mn	0.15 max
Si	0.4 - 0.8
Ti	0.15 max
Zn	0.25 max

888-527-3331 or LiveChat